Prorack Roof rack anchor points

[ndunn Lurker Find all posts View Profile Close ndunn]

We were given a Prorack roof rack and pod for Christmas with prado fixing kit. Having successfully tackled the challenge of getting the factory standard roof bars off our 2008 prado, with a lot of help from posts in this forum, we found nothing to attach the new rack to. Appears we are missing some small arches of metal that should go between the bolts and allow the new racks to be attached. Anyone else encountered this and know where we can buy some.

[Guest Close Guest]

What model Prorack? Can you post a pic?

[ndunn Lurker Find all posts View Profile Close ndunn]

Hi its taken me a while to get around to scanning the image so will try to load it. The roof rack is a P Bar box says part P16, Pod is an EXP2. The first pic shows the part I appear to be missing a piece of arched metal that goes between the bolts. All mine looks like when the old rack is taken off is 2 bolts. Second pic shows the attachment that comes with the roof rack and how it attaches on to the anchor point. Thanks in advance for any help anyone can give

[Guest Close Guest]

That arched metal bit is missing on Prados that come with the north-south roof rails. However, they are present if the Prado does not have roof rails.

This is the closest info I could find.
http://www.pradopoint.com/showthread...f-rack-inserts

I looked up Toyodiy and you want the clips identified by part number 63185D and 2 bolts 90119-08C47.
http://www.toyodiy.com/parts/p_G_200...KQ_6153.3.html
They're available from Toyota.

[ndunn Lurker Find all posts View Profile Close ndunn]

Thanks for the info. Will give Toyota a call and see how I go.