nice work there matt, seems like you have been a busy lad, see even diesel fitters can do 12v
Announcement
Collapse
No announcement yet.
Install of ARB Air Compressor - CKMA12 in a V6 Petrol 120
Collapse
X
-
Re: Install of ARB Air Compressor - CKMA12 in a V6 Petrol 120
top job Matt..
looked like a busy little session there.. 8)
joeyFeatured - issue 140 Australian 4wd Action.
-issue 52 Modified 4wds .
Locked ,Lifted, boosted Brut---"Pradzilla".
[IMG]http://i236.photobucket.com/albums/ff268/bigfryy/_0481154045-2.jpg[/IMG]
-
Re: Install of ARB Air Compressor - CKMA12 in a V6 Petrol 120
She's a bewdy Matt.
Originally posted by pradogxlv6I had to make a spanner to securely mount the compressor, as it is tight. Also when I wIred it up, I was going to wire it to the aux battery, but ARB told me to go for the start battery.
And that spanner... what a classic!
I couldn't wait to test mine out after I finished my install. Have you given it a go?
LFaR.[size=1][color=#770000]29Feb12:[/color][color=#777700]12GXLTD Auto, ARB Deluxe Winch bar, WARN 9.5xp Winch, IPF 900XS, Tow, Safari snorkel, Front + Rear Recovery points, ARB OME NC Sports, ATZ-4Rib[/color][color=grey], Silver[/color]. [color=orange][b]MaxTrax[/b][/color], [color=maroon]ScanGuage II[/color], [color=blue]ARB CKMA12[/color], [color=deeppink]UHF: GME TX3440 AE4018K1 UNH047SX[/color], [color=darkgreen]Bushranger Air Jack[/color], [color=green]Staun + ARB Deflators[/color], [color=brown]WindCheetah Roof Rack[/color], [color=green]Foxwing[/color], [color=red]Super Charge MRV70, Redarc BCDC1220[/color], [color=darkblue]ARB 60L fridge[/color], [color=blue]MSA Fridge Dropdown slide[/color], [color=darkyellow]DRIFTA Drawers[/color], [color=gold]TJM Bash Plates[/color], [color=brown]TG150[/color].[/size]
Comment
-
Re: Install of ARB Air Compressor - CKMA12 in a V6 Petrol 120
HI
thanks for a good write up
Trev LPrado 2003 with a OME 2 inch lift, ARB Delux Bullbar, Warn magnum winch, IPF 9000 spots, Safari snorkel, Daul Batterys, UHF Radio with remote head unit, extra Power outlet, 265 70 17 MTZ's, ARB CKMA12 Compressor, TrackLander Roof rack with two Rear Work lights, rear anderson socket, twin DVD Players, Indash DVD,GPS, running IGO 8 and OziplorerCE, Custom Drawer System
Comment
-
Re: Install of ARB Air Compressor - CKMA12 in a V6 Petrol 120
Good one Matt.
I've also had discussions of having the filter extended through the firewall into the cabin. I guess this could make sense in very dusty environments where the air-lockers would need to be operating. Stretching it all the way back into the cabin makes for a long straw and one that I think would impede tyre-inflation speed. Still, probably not a bad trade-off if it's really needed in those environments.
Your hose looks nice and short, so I wouldn't expect much/any change in performance.
Cheers,
LFaR.[size=1][color=#770000]29Feb12:[/color][color=#777700]12GXLTD Auto, ARB Deluxe Winch bar, WARN 9.5xp Winch, IPF 900XS, Tow, Safari snorkel, Front + Rear Recovery points, ARB OME NC Sports, ATZ-4Rib[/color][color=grey], Silver[/color]. [color=orange][b]MaxTrax[/b][/color], [color=maroon]ScanGuage II[/color], [color=blue]ARB CKMA12[/color], [color=deeppink]UHF: GME TX3440 AE4018K1 UNH047SX[/color], [color=darkgreen]Bushranger Air Jack[/color], [color=green]Staun + ARB Deflators[/color], [color=brown]WindCheetah Roof Rack[/color], [color=green]Foxwing[/color], [color=red]Super Charge MRV70, Redarc BCDC1220[/color], [color=darkblue]ARB 60L fridge[/color], [color=blue]MSA Fridge Dropdown slide[/color], [color=darkyellow]DRIFTA Drawers[/color], [color=gold]TJM Bash Plates[/color], [color=brown]TG150[/color].[/size]
Comment
-
Re: Install of ARB Air Compressor - CKMA12 in a V6 Petrol 120
Hi Matt
I just purchased the ARB air compressor switch but they could not tell me what wire goes to the 5 pins on the rear of the switch....
Can you remember what goes to each pin.
There is three on one side and two on the other.
Thanks
Jack
Comment
-
Re: Install of ARB Air Compressor - CKMA12 in a V6 Petrol 120
Originally posted by jack76Hi Matt
I just purchased the ARB air compressor switch but they could not tell me what wire goes to the 5 pins on the rear of the switch....
Can you remember what goes to each pin.
There is three on one side and two on the other.
Thanks
Jack
The the pin marked "Ground (Lights)" can be joined to the other ground as there is no floating nagative (I think it's called). The pin marked "+12V(Highbeam)" can be linked into your accessories ciruit so that the compressor can only be controlled when accessories are on unless you wish to run off of your Aux battery[COLOR=#000080]Nick[/COLOR]
[URL="http://pradopoint.com/viewtopic.php?f=38&t=5308&sid=bcbebadd30673f1ac72047e6e8a93d79"]2006 TD GXL Evolution & Trips[/URL]
[URL=http://www.fuelly.com/driver/Schaffer/prado][IMG]http://www.fuelly.com/smallsig-metric/45547.png[/IMG][/URL]
[img]http://i929.photobucket.com/albums/mm286/Schaffer71/Avatar/CooperCreek.jpg[/img] [img]http://i929.photobucket.com/albums/mm286/Schaffer71/Avatar/BendlebyRanges.jpg[/img]
Comment
-
Re: Install of ARB Air Compressor - CKMA12 in a V6 Petrol 120
Thanks Nick
That is great. I just purchased the switch by itself and they couldn't tell me how to wire it up. I will get on to it soon.
I am just going to replace the current switch i used but i like the idea of having the switch labeled.
Jack
Comment
Comment