Recovery Points

[REV Find all posts View Profile Close REV]

Ok will put up some pics of the OI points with the TJM bar & plates tomorrow.

[Muz Junior Member Find all posts View Profile Close Muz]

Yes mine does have the plates and mine is a 150 also. I haven't looked too closly but I doubt that you would get these points on to a 120, would you?..................Anyone?????

I have an old style T13 (no fog lights) on a 120. I reckon the OI for the 150 looks like it would fit, the Oi for the 120's wont fit for the bull bar bracket. Can you measure centre to centre of bolt holes and I will measure the 120 to see if it might fit?

Paul

[Muz Junior Member Find all posts View Profile Close Muz]

Just measured my 120 and it is around 190mm centre to centre.

I am hoping the 150 recovery points will fit or else I will only be left with recovery hooks bolted under the bull bar on either side of the winch.

Paul

[butane8 Avid PP Poster! Find all posts View Profile Close butane8]

boyz dont get side tracked .. there is previous post regarding these points /plates and design...

this is what you need.



if you want beefy , go thicker plate... cheers butane

[Muz Junior Member Find all posts View Profile Close Muz]

[QUOTE=butane8;379362]boyz dont get side tracked .. there is previous post regarding these points /plates and design.../QUOTE]

Butane,

I have been through and subscribed to several posts regarding recovery points for 120 and 150's but haven't come across any solutions for a 120 with a T13 bull bar. If this is what you are referring to I would appreciate any pointers or links in the right direction as far as posts with a solution.

I apologise to any of the more seasoned posters that are sick of the same issues/questions over and over but I am new to Prado ownership and cannot find the answer after much searching. If there is a link to a blast from the past so I can have rated front points I would appreciate it.

I have a great deal of respect for the moderators and seasoned Prado Pointers that have unbeknowened helped me so far, but I would like nothing more than to have rated recovery points so I could attend the next local get together like the one held here near Brisbane last week.

Paul

[REV Find all posts View Profile Close REV]

Hi Muz I will measure mine and let you know tomorrow.




cheers
Lawrie

[Muz Junior Member Find all posts View Profile Close Muz]

Thanks Rev,

I really do appreciate it.

Muz

[gumboot Avid PP Poster! Find all posts View Profile Close gumboot]

Moving the discussion of 120 series front recovery points with an ARB bar to the correct forum.

So do they fit a 120 series with an ARB deluxe bar as per above?
As there seems no external options on the market at the moment for ARB bar owners.
Cheers

[Trekrider Banned Find all posts View Profile Close Trekrider]

So do they fit a 120 series with an ARB deluxe bar as per above?
As there seems no external options on the market at the moment for ARB bar owners.
Cheers

I stopped looking after Brett's offer to make some - waiting to be contacted for the trial fit.

[REV Find all posts View Profile Close REV]

Just measured my 120 and it is around 190mm centre to centre.

I am hoping the 150 recovery points will fit or else I will only be left with recovery hooks bolted under the bull bar on either side of the winch.

Paul

Yep, my OI Points have the holes 190 mm centre to centre.

[paulyc Member Find all posts View Profile Close paulyc]

I have an old style T13 (no fog lights) on a 120. I reckon the OI for the 150 looks like it would fit, the Oi for the 120's wont fit for the bull bar bracket. Can you measure centre to centre of bolt holes and I will measure the 120 to see if it might fit?

Paul

I will be interested to see if the points for the 150 will fit a 120 with the new style T13. May have to pay a visit to TJM sometime to see if they've got any in stock to see.

[butane8 Avid PP Poster! Find all posts View Profile Close butane8]

just in case i jumped the gate early,,, apoligies ... I'm not sure what you mean by the t13 bar but see if there anything here to help out ,,

http://www.pradopoint.com/showthread...ecovery+plates

cheers butane

[Muz Junior Member Find all posts View Profile Close Muz]

Yep, my OI Points have the holes 190 mm centre to centre.

Thanks Rev,

I too will be heading to TJM to have a look at the 150 OI points. I will post back any discoveries.

[Muz Junior Member Find all posts View Profile Close Muz]

I have been to TJM Geebung and also rang TJM Brendale this morning and they don't have any stock of the 150 recovery points. They currently don't even have a supplier. TJM Geebung had a look and also agrees that the 150 points look like they will fit.

TJM Brendale is contacting a potential supplier and will get back to me on Monday about them. Brendale is also happy to get one in for me to see if it will fit on my 120 with an old style T13 on it.

I will just have to wait and see.

[REV Find all posts View Profile Close REV]

I have been to TJM Geebung and also rang TJM Brendale this morning and they don't have any stock of the 150 recovery points. They currently don't even have a supplier. TJM Geebung had a look and also agrees that the 150 points look like they will fit.

TJM Brendale is contacting a potential supplier and will get back to me on Monday about them. Brendale is also happy to get one in for me to see if it will fit on my 120 with an old style T13 on it.

I will just have to wait and see.

Hi Muz, let me know how you get on. I was in TJM Townsville on Thurs and they had about 3 sets of the OI 150 points.