Engine warning light

[Goanna12 Lurker Find all posts View Profile Close Goanna12]

Hi all hoping someone can help. I have a 2000 model 3 litre diesel Prado rv. Several times the engine warning light has come on . When this happens I get a loss of power and can only crawl along. I stop turn off ignition leave for 10 min. and restart all is then well for several days .I have just replaced the fuel filter but was having problem before that. Can anyone help me please
Kev

[joel231 Find all posts View Profile Close joel231]

might need to get a auto sparky to put a scan tool on the car mate, as it could be any number of things causing the vehicle to go in to limp mode.

CHeers Joel

[adrian5800 Advanced Member Find all posts View Profile Close adrian5800]

Hi all hoping someone can help. I have a 2000 model 3 litre diesel Prado rv. Several times the engine warning light has come on . When this happens I get a loss of power and can only crawl along. I stop turn off ignition leave for 10 min. and restart all is then well for several days .I have just replaced the fuel filter but was having problem before that. Can anyone help me please
Kev

Read this thread http://www.pradopoint.com/showthread...1KZ-TE-amp-D4D

[LeighW Avid PP Poster! Find all posts View Profile Close LeighW]

Don't have a power chip fitted do you?

[t303 Senior Member Find all posts View Profile Close t303]

You can pull the diagnostic code by jumpering two terminals in the diag box near the top radiator hose. You can download a shop manual with the method, search for 1KZTE manual in a PDF. I don't have the details with me at the moment, but you just need a couple of inches of thin wire. If you can get the flash codes from the dash LED we might be able to help. If you have a KZJ95 RV there is no body computer as such, just the ECD for the engine. You don't need a scanner as it will give you no more information than what the flashed LED codes will.

[Goanna12 Lurker Find all posts View Profile Close Goanna12]

Engine warning light

The model is a KJZ95R 1/2004 build.
Where can I find a workshop manual to work out what the codes are?
Thanks for the help so far

[cfryback Find all posts View Profile Close cfryback]

I've had a P0400 code for ages, I have the part - but the orange glow keeps me company....

[t303 Senior Member Find all posts View Profile Close t303]

AFAIK the KJZ95 production ceased in late 2002, are you sure about the build date?
There's this new fangled thang called google:
https://www.google.com.au/?gws_rd=ss...-te+manual+pdf

[Goanna12 Lurker Find all posts View Profile Close Goanna12]

Prado build date is 2001

Prado build date is 10 month of 2001