2-way switch

[krypto Avid PP Poster! Find all posts View Profile Close krypto]

I'm pretty sure that I've seen this discussed but I can't find the thread.

What 2-way switch fits neatly into the standard switch panels? I saw a fairly neat fitting switch on the reverse camera mod tread but it doesn't say what sort of switch it is.

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

http://www.customrockers.com.au/epag...3743372&Page=4

$25 ea plus post. I am pretty sure they are the same as ARB switches which fit perfectly.

[Schaffer Addicted PP Member Find all posts View Profile Close Schaffer]

That is a Carling Contura Series III switch, manufactured in MEXICO. That is what ARB use. There are a lot of places thay sell them You can pick up a switch with very rudimentry switch covers from ARB for about $15.00. They will require a small amount of filing on the switch panel to fit. With this filling the blanking panel will still fit if required. There are other switches which will also fit. I believe the Narva rocker switches will fit with a small amount of filling as well.

[PradOz Advanced Member Find all posts View Profile Close PradOz]

I have used the narva brand and they arent expensive. they need slight filing to fit width wise, height was ok from memory. they are available at repco and if not in store they got mine in on the same day [if ordered early enough in the day]

[wooley Avid PP Poster! Find all posts View Profile Close wooley]

has anybody inquired into the standard toyota switches which come in the vehicle? they obviously fit well, but i assume the cost is prohibitive...

[ABR-SIDEWINDER Member Find all posts View Profile Close ABR-SIDEWINDER]

Sidewinder 2 way switch

I used our standard 2 way switch, it is mounted using 3m tape and fits well in the square hole.