I've had one of the parking light globes blow after only a few months . Do you have to remove the plastic light assembly to replace the globe ? Is there an LED replacement available ?
Cheers
Ross
Theres 2 screws on the inside, you can get them by removing the side cover plates or partially removing the wheel arch liner, they are alot easier accessed on the 120 as the grill lifts with the bonnet.
I fitted LED's to mine as soon as i got the bar (add the 2 weeks shipping from China), will post a link later if you still need it.
[size=1]2011 GXL D4D Auto | ARB Deluxe winch bar | Bilstein/Ridepro platinum lift | MT ATZ P3's | Dick Cepek Torque rims | Airtec snorkel | Lightforce Genesis 55w HID | GME UHF | 55w HID high beam | Rhino Rack bars & Cage | ISI extreme rack | Dual Optima Batteries | Milford MXV-70 cargo barrier | ARB onboard air | Prodigy P3 | Drawers & Black widow fridge slide | Waeco CF-50 | Kaymar rear bracket and LED light | EscapeGear seat covers | Sandgrabbas and more...[/size]
Hey D4D. Just wondering if your bar had the brackets at the back of the park lights and if not, how did you mount the LEDs? The LEDs don't have the hole through them which is how the current parkers are attached and I want to make sure they are fitted securely. Hey D4D. Just wondering if your bar had the brackets at the back of the park lights and if not, how did you mount the LEDs? The LEDs don't have the hole through them which is how the current parkers are attached and I want to make sure they are fitted securely.
Stephen Bloomer
I did have - 2010 GXL D4D Auto, ARB bullbar, rails, sliders, winch, 40mm lift, Brown Davis bash plates and long range tank
Putting in LED globes are the quick fix that should help with the problem of globes blowing, but putting in a full sealed LED would give a better result IMO as this would be water and dust tight as well.
Steve.
Stephen Bloomer
I did have - 2010 GXL D4D Auto, ARB bullbar, rails, sliders, winch, 40mm lift, Brown Davis bash plates and long range tank
Comment