ARB Deluxe Bar Parking lights

[vk2ss55 Senior Member Find all posts View Profile Close vk2ss55]

I've had one of the parking light globes blow after only a few months . Do you have to remove the plastic light assembly to replace the globe ? Is there an LED replacement available ?
Cheers
Ross

[D4D Addicted PP Member Find all posts View Profile Close D4D]

Common issue, go LED, checkout my build thread

[alternative Senior Member Find all posts View Profile Close alternative]

Theres 2 screws on the inside, you can get them by removing the side cover plates or partially removing the wheel arch liner, they are alot easier accessed on the 120 as the grill lifts with the bonnet.

I fitted LED's to mine as soon as i got the bar (add the 2 weeks shipping from China), will post a link later if you still need it.

[alternative Senior Member Find all posts View Profile Close alternative]

D4D yours look the part, what price are they if you dont mind ?

[ss--ss Member Find all posts View Profile Close ss--ss]

G'day , I'd be interested in the LEDs also, was also wondering the other day if hid lights could go in them?
Thxs I'll keep an eye on this thread ..

[D4D Addicted PP Member Find all posts View Profile Close D4D]

http://eziautoparts.com.au/lighting/...mm-x-24mm.html

[craigm Addicted PP Member Find all posts View Profile Close craigm]

Heres the link where D4D detailed his LED upgrade along with a couple of other options using LED bulb replacements.

http://www.pradopoint.com/showthread...l=1#post265370

[alternative Senior Member Find all posts View Profile Close alternative]

Thanks guys, i already replaced one that started to "blink" 3 of the LED's, if anything happens them again i'll replace with this unit.

cheers

[smakb Advanced Member Find all posts View Profile Close smakb]

Heres the link where D4D detailed his LED upgrade along with a couple of other options using LED bulb replacements.

http://www.pradopoint.com/showthread...l=1#post265370

Hey D4D. Just wondering if your bar had the brackets at the back of the park lights and if not, how did you mount the LEDs? The LEDs don't have the hole through them which is how the current parkers are attached and I want to make sure they are fitted securely. Hey D4D. Just wondering if your bar had the brackets at the back of the park lights and if not, how did you mount the LEDs? The LEDs don't have the hole through them which is how the current parkers are attached and I want to make sure they are fitted securely.

[D4D Addicted PP Member Find all posts View Profile Close D4D]

Read my build thread or the link posted, it is all in there...

[smakb Advanced Member Find all posts View Profile Close smakb]

Read my build thread or the link posted, it is all in there...

Apologies. I was looking at your MySwag link instead of you PP build.

[smakb Advanced Member Find all posts View Profile Close smakb]

Has anyone fitted these LED lights to the newer bar that does not have the metal backing plate to mount the light on?

http://eziautoparts.com.au/lighting/...mm-x-24mm.html

[vk2ss55 Senior Member Find all posts View Profile Close vk2ss55]

Is there a simpler method than changing the whole assembly . Couldn't you just use a LED replacement lamp ?
Cheers
Ross

[smakb Advanced Member Find all posts View Profile Close smakb]

Putting in LED globes are the quick fix that should help with the problem of globes blowing, but putting in a full sealed LED would give a better result IMO as this would be water and dust tight as well.


Steve.

[matt150 Avid PP Poster! Find all posts View Profile Close matt150]

I went the bright light Led globes today. Sealed up the lenses with silastic..