Should i need to re aim low beams after removing and refitting headlight assembly on VX with Led

[digys Junior Member Find all posts View Profile Close digys]

Hi Guys,

Is it a possibility that i need to re aim my low beams after removing the headlight assembly and putting it back on. I think not as all the settings for aiming the lights are internall housed in the assembly and not anywhere on the screws that mount to the chassy of the truck. The reason i ask is that afer fitting eveythihing back in it seems that my low beams are pointing slightly higher. How would auto levelling affect this?
I have a 2.8 vx with the leds and the last thing i want is to blind people.

It might just be a placebo thing as driving around last night i didnt get anyone flashing their lights at me.

Any thoughts.

[digys Junior Member Find all posts View Profile Close digys]

Took car to the dealer to have it checked. Headlight aim are within specification. ☺

Reason i had to remove the headlights was because i fitted the IPF Hb3 led for the highbeams. The fan and heatsink was to big to fit normally through the engine bay.
The difference is amazing. Makes a world of difference compared it to the stock halogens or generic branded led bulbs....