150 Starting issue.

[yowie Advanced Member Find all posts View Profile Close yowie]

Had trouble with mine not starting once whilst I was out bush, refused to start or turn off the green light, it just kept flashing. The missus had opened a back door just as I was pushing the start button, so that may have caused the problem. I locked the vehicle with the fob, then unlocked it, and the vehicle started straight away after that. No problems since.

Yowie.

[Riv39 Advanced Member Find all posts View Profile Close Riv39]

I don't think that would explain the fault codes displayed.

Thanx anyway
Alan.

I don't know about that Alan, those errors could occurr if the switch was causing the 'loss of comms'.

[chester ver 2.0 Member Find all posts View Profile Close chester ver 2.0]

Body control module can usually be reset by disconnecting battery then reconnecting however this will then usually trigger a limp home mode.
The clutch microswitch on the mine 150s up here gives us no end of trouble and is usually bypassed i would think ther maybe a similar swtch under the brake pedal on the autos

[alfie1 Lurker Find all posts View Profile Close alfie1]

Hi Alfie, did your ignition come on or was it a Fob issue?

Alan.

Ignition came on each time

[Jazig.k Lurker Find all posts View Profile Close Jazig.k]

Hi all. Don’t want to start a thread for the same issue.
father in-laws prado, which I just bought off him, has just come up with this error a few days before I was supposed to take
it. It’s at the diesel mechanics now, and getting worked on tomorrow.

Has there been any proper resolution? A new BCM?