Transmission solenoid valve B (S2) part number

[xXxPradoLover69xXx Lurker Find all posts View Profile Close xXxPradoLover69xXx]

Hi, recently, my Prado shifted in a strange manner and the check engine light came on. The code i got was P0758 which means shift solenoid valve B (S2) electrical problem. Does anybody know the part number for this solenoid valve? Is 35250-30070 the correct one?
I have a 2001 Prado 95 3.0 D4D with the A343F transmission. The frame number is JTE BZ9 9J3 0001 5201.

[SamSta Member Find all posts View Profile Close SamSta]

Have a look at the wiring going to the solenoid and check for damage. Especially close the the connector. You might just have a broken/exposed wire which is preventing correct values being sent to the ECU?

[xXxPradoLover69xXx Lurker Find all posts View Profile Close xXxPradoLover69xXx]

Have a look at the wiring going to the solenoid and check for damage. Especially close the the connector. You might just have a broken/exposed wire which is preventing correct values being sent to the ECU?

I dont think thats the problem, because after a jolt and revving up high, it will shift. Its almost as if the solenoid is stuck or too slow.

[Piggy Water pistol pilot. Find all posts View Profile Close Piggy]

Could always pull the solenoid/s and try cleaning them up. They often get a bit of gunk and stuff on them which can seize up the mech.

[amts Ninja Poster. Find all posts View Profile Close amts]

From the diagram here, it looks like you've got the right solenoid - the mounting tabs are on the same side of the solenoid body.
https://at-manuals.com/manuals/a340-a341-a343/