Splash guard clips

[Gihan Lurker Find all posts View Profile Close Gihan]

If anyone looking for splash guard clips here is a cheap alternative. I break these every time I pull the splash guard liner out.
http://www.ebay.com.au/itm/271172608...84.m1497.l2649
Actual part number is 90467-10186 but one on the ebay are (for Tercel) also fits. 7mm.
Mind you, they got my address (house number) wrong and AusPost kind enough to track me down by Name.
At stealership these must be expensive. I didn't even bother to check
Hope this helps someone.
Cheers,
Gihan.

[fido666 Banned Find all posts View Profile Close fido666]

Hmmm, these look like the ones used to hold the radiator cover on my 150 series as well. Will have to measure, would be handy to have some spares as have broken a few.

[Nema Senior Member Find all posts View Profile Close Nema]

Nice find Gihan. I am missing quite a few of these.

[Dazz Junior Member Find all posts View Profile Close Dazz]

I recently replaced my splash guards- Purchased some 3mm rubber from Clark rubber. about $35 for 1lm of 600mm wide.
Enough to do both front splash guards.
I used a combination of supercheap clip retainers and zip ties.

The clark rubber stuff is heaps thicker than original but is plaible enough to do the job.

Pretty happy with the result- just had to remove the wheels- spend some time cutting the rubber with a pair of good scissors and drilled the clip holes out.