So I decided it was time to make myself a better sand flag.
After some research online I was not willing to pay the $100 + for a shop one so this is how I decided to make it.
4x9.5mm elastic joined tent poles from Rays $10
Some quick disconnect air fitting from Bunnings $30
and this is how it turned out
Andrew
2005 VX Diesel - [URL="http://www.pradopoint.com/viewtopic.php?f=38&t=12823"]My Rig Buildup[/URL]
[URL="http://www.fuelly.com/smallsig-metric/65233.png"][img]http://www.fuelly.com/smallsig-metric/65233.png[/URL][/img]
[B]Bitumen - A blantant waste of taxpayers money![/B]
[URL="http://www.pradopoint.com/viewtopic.php?f=38&t=12197&start=0&st=0&sk=t&sd=d"][/URL]
So I decided it was time to make myself a better sand flag.
After some research online I was not willing to pay the $100 + for a shop one so this is how I decided to make it.
4x9.5mm elastic joined tent poles from Rays $10
Some quick disconnect air fitting from Bunnings $30
and this is how it turned out
Howdy;
Sorry for hijacking your thread.
As I'll probably be heading down to Robe next weekend, I needed a sand flag. Don't mind me, I'm going with your good idea
For others who are trying to figure out which connectors are used; check out my two pictures below -
Greatly appreciated
Thanks!
-EasyCompany24
[b]Black 2007 Chrysler 300c 5.7L V8[/b]
SOLD - 1997 Toyota Land Cruiser Prado GXL
Awesome cheap mod, will try this one myself.
Begs the question why are sandflags so expensive in the first place?
07 Silver Grande AUTO, front runner rack, maxtrax, ARB on board compressor, safari snorkel, bushranger roof top pack... [COLOR="#DAA520"]and a bit of bling for the back (08 CUB Regal Supermatic Offroad).[/COLOR]
Comment