Tweet
Originally posted by paddyb
View Post
-
I also fitted a set up to my GXL 2.8 a couple of weeks back, I used a floor jack to assist with holding up the front plate. They are some pretty serious bash plates! and sit up quite high which is what I was after.2016 Toyota Prado GXL auto. ARB deluxe bar, Rock Armor side steps, 9in Penetrator LED spotties (30,000LM), Uniden 8060 UHF, Bilstein/Dobinson 2in lift, 265/70/17 Mickey Thompson ATZ P3's, Safari snorkel, Dual battery system, ARB onboard compressor, Custom rear false floor, Kaon bash plates, Ext. diff/gearbox breathers, Provent 200, Wynnum tow bar, Roadsafe tow points, Phillips crystalvision bulbs, tint, Rhino rack platform. -
Love to see the photos if thats ok Paddy...very interested.Originally posted by paddyb View PostSE Qld: GX 150GD Auto, (Feb'16 build): TJM T15 steel b bar, 9,500lb TORQ winch, TJM s steps, Rhino Pioneer Platform (42102B 1928X1236mm), front recovery points, Wynnum towbar, P3 brake controller, TNN Underbody guards, UHF, TREKtable & LED striplight, Custom Fridge & Drawers, Waeco CFX50, 9inch illuminator 160W LED spots, 40mm lifted Dobinson Suspension (Zordo's), ScanguageII, 30 Sec Wing AwningComment
-
Images of 150GXL 2.8 auto bash plates
sorry they are not the best of images, I can take some more and send on privately if you need them.Comment
-
Hi, Are these bash plates still available to buy?Comment
-
G'day Tin
Mate do you have any or are you getting any tranny guards?.
Cheers,
Chappy.Fitted so far:-Toyota Alloy bar,Redarc BDCD1220 battery managment system and dual power outlet,tracklander full length rack and ladder,Milford cargo barrier,Kaon transmission guard, UVP& Lower Shock mount Guards,Dobinson/Bilstein suspension,Toyota Bonnet and headlight guards,39ltr engel and an opposite lock stubby holder (from the old '80' series),Polyair Airbags,Pradopoint sticker,Gonefishin' custom Sidesteps.Comment
-
I have a couple of bash plates left and a few transfer/actuator guards. Will probably start another batch soon.Originally posted by chappy View PostComment
-
Hi Tin, I've just sent you an email, if you're still in the bash plate business I'd love to be a customer.Comment
-
I still have a few left from the batch I started last month. I have emailed you back.Originally posted by Eukaryote76 View PostComment
-
Nice to meet Tin tonight on my journey up the M1. Pleasant straight forward bloke to deal with. Thanks for the advice on taking off the OEM sump guard. First part completed. 2 more plates to fit. Looking good. Thanks again. Sturdy looking product.Originally posted by Tin175 View PostComment
-
How much do they weigh compared to the Toyota ones they replace?Comment
-
The sump and transmission guard a 22kg in total. The transfer/actuator guard is 9kg. Not sure what the standard bash plate would weigh. I'd say less than 10kg. I have a set of Toyota ones at home. I'll weigh them tonight.Originally posted by peter_mcc View PostComment
-
Got any left?2013 150 Prado Altitude D4D in Graphite - [B][URL="http://www.pradopoint.com/showthread.php?37048-Brougham-s-150-Altitude-build"]My Rig Build thread[/URL][/B]Comment
-
I'd be keen for set too. How do the fit with an ARB bullbar?[SUP]2013 150 Altitude D4D Graphite[/SUP]Comment
-
I'll have another small batch ready in a couple of weeks. They fit the ARB and TJM bullbars.Originally posted by Rustymullet View PostComment
-
I'm also interested in buying a set. I have a manual petrol GXL, that should fit right?Comment
Comment