Fitted recovery points purchased from AMTS - great quality piece of kit, and very easy to fit!
...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
205 results in 0.0133 seconds.
Keywords
Members
Tags
-
Yeah, I heard that if you were going to do it, then a good time to fit that restrictor plate is when you have the intercooler off and the EGR all dis-assembled....
Leave a comment:
-
And just for reference, if you were going to fit one of those dodgy EGR restriction plates then it would probably make sense to do it while you have the...
Leave a comment:
-
Even though I had the intake all cleaned around 20,000 km ago I decided to remove the EGR valve and intake elbow to have a look. I was a bit surprised...
Leave a comment:
-
Click on the pictures - they open in a new window much larger....
Leave a comment:
-
I did my EGR last weekend - my pics are below.
About 20,000 km ago I had the injectors replaced and while that was done I had the full intake cleaned...
Leave a comment:
-
Sorry for late reply.. Have been out of country. Dimensions of the core are (HxLxD) 280 x 300 x 76. The overall width including the end tanks is around...
Leave a comment:
-
-
Yep, for sure.. The cooler I've fitted is about as thick as you'll get in there without a scoop, and there's definitely no room for a fan on mine..
Leave a comment:
-
Yep, shouldn't be a problem at all. Just be aware that the factory head unit for the 120 series is not exactly 2 DIN in size, so you will probably need...
Leave a comment:
-
Dunno to be honest? I did call Cross Country to see if they did a top mount option for the Prado before I set off down this path, and they said no. As...
Leave a comment:
-
I've just posted up the details of how I upgraded the top mount intercooler on my 120 D4D. Have a look at this thread:
http://www.pradopoint.co...
Leave a comment:
-
Finally fitted the new top mount intercooler. This is an Aero 2 intercooler from PWR. I had them flip one of the end tanks, and had my local exhaust shop...
Leave a comment:
-
I tested the acceleration and consumption performance using my OBDII reader. Before and after the install I ran four 0-100 km/h sprints (two in each direction...
Leave a comment:
-
Close up of the new cooler installed:
Showing the new pipe work from turbo to inlet side of cooler:
Showing the...
Leave a comment:
Leave a comment: